C600 Midrange Horn

We have had some 600hz midrange horns made.  They are aluminum made using the sand casting process then machined and threaded with the standard 1 3/8 18 TPI for a thread on driver such as the K-55 or our new A-55G midrange driver. Then the new horns went to a powder coating facility and were powder coated black.  A lot of people have wanted to build a speaker similar to the Klipsch Cornwall but the K-600 horns are pretty hard to locate.  These new horns are an exact replacement for that original horn.

Horn Dimensions:

Depth from front of flange to top of horn is 11 1/4 inches.

Width outside of flange is 11 11/16 inches.

Height outside of flange is 4 13/16.

Horn mouth opening 10 1/4 X 3 3/8 inches.

Depth of horn and K-55V driver is 13 5/8 inches.

Depth of horn and A-55G driver is 13 9/16 inches.

Each horn weighs about 4 pounds without driver.

Horn has 6 mounting holes in the flange.


Some Pictures of the new C600 horn.

C600PC1
600c
C600d

B & K Sound, 1925 East Gum Log Rd. Russellville, AR, 72802 phone-479-967-1542